How To Choose A Transmission For Your Tractor

Putting power to the ground

By Geof Fowler, Aug 08, 2013
Whether it be a 12.5 HP 38” riding lawn mower or a 300+ HP row crop tractor, output from the engine needs to be put to the ground in some manner. To do so, a transmission is the modern miracle relied upon to transfer that power, modulate ground speed and deliver secondary output to the power take off (PTO) so an implement can run.

But not all transmissions are the same. Some are designed with cost constraints in mind, some are designed with ease of use as their primary criteria, and some are more efficient at getting the job done. Read on to see what transmission choices are available (we’ll try not to get too technical) and help determine which is right for you.

John Deere X739

Gear Transmissions

A gear transmission is a highly-efficient method of transferring power. Using a clutch to engage and change speeds, a gear transmission can come in several forms. Gear transmissions are popular not only in entry-level tractors due to cost constraints but also in high-horsepower farm tractors for the exact control over ground speed they offer, a requirement during operations such as seeding or applying fertilizer. We’ll touch on four commonly used variants.

VIEW: How To Shop For A Tractor: Part I

A sliding gear transmission uses a shift fork to move the selected gear into position. Because the gear being used is turning at a different speed than the one to be shifted to, on-the-go shifts can result in a crunching of the gear sets. Some refer to this type of transmission as a “crash box.” A sliding gear transmission is among the most economical to produce and is heavily used in entry-level lawn tractors. Unless abused, a sliding gear transmission should last a very long time.

Another type of gear transmission is known as a collar shift where the gears don’t slide into place but utilize a collar between each gear set (i.e. 1st to 2nd and 3rd to 4th). In this type of transmission the collar is the moveable component. A collar shift transmission with its added components is more expensive to produce than its sliding gear sibling, but with less shock to internal components is typically more durable.

New Holland Workmaster 55

A synchro shift transmission is a collar transmission with synchros added for smoother gear changes. In this case the synchro equalizes the gear rotation so gear changes are timed perfectly. Synchros can cover certain gears only or be across the entire available gear set. A shuttle shift transmission is a variant that adds synchros between forward and reverse which can be particularly effective in loader work when driving into a pile, picking up a load and rapidly reversing are desirable. As to be expected, a synchro shift transmission is more expensive to produce than a collar shift transmission but less than a shuttle shift.

Lastly, power shift transmissions are similar to collar shift transmissions but instead of using collars, clutch packs lock the selected gear onto the rotating shaft. This is the only type of gear transmission where the clutch isn’t required for directional, and in some cases, gear changes. Front end loader work is effectively enhanced with this type of set up.

Zetor Forterra

Hydrostatic Transmissions

Hydrostatic transmissions have been around for a long time. Unfortunately, many salespeople and sometimes the literature they use will compare this type of transmission to that of an automatic transmission used in an automobile. But the only commonality shared by a hydrostatic transmission and an automobile automatic is that they both use oil to transmit power. A hydrostatic transmission is more accurately described as a variable displacement pump driving a fixed displacement motor. What you do get with a hydrostatic transmission is infinitely variable control over ground speed with directional changes a simple hand or foot control motion away.

Kubota B2650

With a hydrostatic transmission there is no clutch, only a neutral (center) position that is used to start the tractor and idle. For simplicity sake we’ll focus on foot controlled hydrostat variants where forward motion begins by depressing a pedal. To increase ground speed, the pedal is further depressed. To stop, the pedal is allowed to return to the neutral position. To reverse, the pedal (can be a heel pedal in the case of treadle controls or a second side-by-side pedal) is depressed. Reverse speed is also controlled by the amount of pedal travel exerted.

VIEW: How To Shop For A Tractor: Part II

This simple operation is favored by many for its ergonomic feel, learning ease, quick directional change and modulation over ground speed. In larger tractors, where front end loaders are an option, productivity soars as one hand can be on the steering wheel, the other on the loader joystick control and the foot controlling the speed and direction.

Simplicity Lawn Tractor

One thing to note: on many lawn tractors equipped with hydrostatic transmissions, the units are designed to be non-serviceable. This means there is no filter, filtering harmful contaminants from the fluid flow, and there is no means to empty and change fluid. We recommend these transmissions for only the lightest of duty and certainly not for ground engaging activities or where any substantial slope conditions are involved. Although a hydrostatic transmission is for many the ultimate in convenience and ease of use, it will typically rob more engine and PTO horsepower than with its gear cousin.

CVT Transmission

Constant velocity transmissions are a little less known than gear or hydrostatic drives, though they have long powered snowmobiles and machinery such as milling machines and drill presses. A CVT transmission in its simplest form works through a belt situated between conical pulleys that open and close as needed to vary the gear ratio.

Challenger Tractor

There are many types of CVT transmissions, but the general power transmitting concept remains the same. What the CVT does offer is improved fuel efficiency due to the ability to always keep the engine at its most efficient RPM band. Conversely, a CVT can also maximize power by keeping the engine at the RPM with peak horsepower output, which usually is at a greater speed than where peak efficiency occurs.

VIEW: How To Shop For A Tractor: Part III

Which To Choose?

So which transmission is right for your use? The mechanical simplicity and durability of a gear transmission, albeit at having the added effort of manually selecting a gear and then having to use a clutch? Or, the foot pedal ease of a hydrostatic transmission? Or, a CVT with its effective use of power but not so certain maintenance or lifespan? The answer lies somewhere in a compromise of ergonomics, cost, usage and personal preference. Our choice is usually a hydrostatic unit, but we admit power shift transmissions are fast growing on us. As for CVTs, the jury is still out.


Free Join the Tractor.com Newsletter to receive the latest tractor news, reviews, and alerts in your email box. Submit your email address below to subscribe!

Recent Comments

  • Todd
    Some great tractors, the automatic controlled traction on the Simplicity Broadmoor really comes in handy ...
  • Carl
    I praise JD for achieving the honor but if they have not redesigned the seat material so it does not crea...
  • Shane Y.
    Hypro's polypropylene heads are very reliable.  There are a lot of other great diaphragm pump compan...
  • Johannes
    Farming in Africa the only traktor is John Deere from 70diesel on thank you joh deere
  • Sam
    Hahaha, that's hilarious! Stupid walmart.
  • Green Tractor wrecks Havock @ wallmart! - Buick Regal Forum : 2011 Buick Regal Forums
    [...] This is seriously messed up, bad prank or someone really screwed up! makes me wonder who has to pay...